Brickwork & Masonry Cleaner

Add 1 litre of the product to 10 litres of water. Apply the solution with a brush or by spraying with a pressure sprayer. Pre-wet dry facades before use to prevent excessive absorption by the stones. Work from bottom to top to avoid streaking. Allow the solution to work for approximately 10 minutes, then rinse the facade with water. For heavy deposits of limescale, rust, cement, smog, and grease, a repeat treatment may be necessary. IMPORTANT: Always test on an inconspicuous area before use. Do not use on or allow contact with zinc, stainless steel, chrome, or galvanised surfaces.